Webshop » Motoren & Versnellingsbakken » GM Long Block 335ci 390HP

GM Long Block 335ci 390HP

Geachte klant,
Indien er geen prijs/levertermijn weergegeven staat of u het artikel dat u zoekt niet kan vinden kan u dit steeds opvragen.
Dit kan u doen door hier te klikken.

Al de op de webshop vermelde prijzen worden inclusief 21% BTW weergegeven.
B2B-klanten: Indien u als buitenlands EU-bedrijf koopt kan u BTW-Vrij aankopen met uw EORI-compatibel BTW-nummer.
Dit kan u bij het afrekenen invoeren en dan gaat het BTW-bedrag er automatisch af.

GM Long Block 335ci 390HP GM Long Block 335ci 390HP

Vraag offerte aan

Blueprint engine GM compatible - Long Block 355ci
390 HP | 547 Nm

Base 355ci with Aluminum Heads and Roller Cam

BLOCK
Hand picked seasoned block.
Square and parallel decked.
Align honed main bearing bore.
Cylinders honed on computer controlled machine to within .0002 straightness and roundness.
Cylinders are sonic tested for thickness.
4-Bolt Main.
4.000" Bored .040" Over.
1-Piece Rear Main Seal.
Mech fuel pump provision: Yes.
Passenger Side Dipstick.
Drilled and tapped for clutch linkage.

ROTATING ASSEMBLY
Cast steel crankshaft.
3.480" Stroke.
OEM type 5.700" connecting rods w/ 150,000 psi bolts.
Hypereutectic pistons.
Internal Front/ External Rear.

CYLINDER HEADS
BluePrint Aluminum Cylinder Heads - H8002K.
64cc chamber.
2.02" intake/1.60" exhaust valves.
195cc intake/75cc exhaust runners.
2K.

CAM SPECS
Cam Type: Roller
.495 Intake .503 Exhaust.
220 Intake / 224 Exhaust duration.
@ .050 - 112 degree lobe separation

IGNITION TIMING
34 Degrees Total at 3500 RPM.

ALSO INCLUDES
New valve covers
Oil pan
Timing cover
Brass freeze plugs
Dyno test results shipped with engine


A bronze distributor gear is NOT recommended on this engine. Recommended spark plugs are Champion 792 with .045" gap. Image of engine may not be that of actual engine.

Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons
Webshop gemaakt met EasyWebshop