Webshop » Motoren & Versnellingsbakken » GM Long Block 335ci 375HP

GM Long Block 335ci 375HP

Geachte klant,
Indien er geen prijs/levertermijn weergegeven staat of u het artikel dat u zoekt niet kan vinden kan u dit steeds opvragen.
Dit kan u doen door hier te klikken.

Al de op de webshop vermelde prijzen worden inclusief 21% BTW weergegeven.
B2B-klanten: Indien u als buitenlands EU-bedrijf koopt kan u BTW-Vrij aankopen met uw EORI-compatibel BTW-nummer.
Dit kan u bij het afrekenen invoeren en dan gaat het BTW-bedrag er automatisch af.

GM Long Block 335ci 375HP GM Long Block 335ci 375HP

Vraag offerte aan

Blueprint engine GM compatible - Long Block 355ci
375 HP | 534 Nm

BLOCK
Hand picked seasoned block.
Square and parallel decked.
Align honed main bearing bore.
Cylinders honed on computer controlled machine to within .0002 straightness and roundness.
Cylinders are sonic tested for thickness.
4-Bolt Main.
4.000" Bored .040" Over.
1-Piece Rear Main Seal.
Mech fuel pump provision: Yes.
Passenger Side Dipstick.
Drilled and tapped for clutch linkage.

ROTATING ASSEMBLY
Cast steel crankshaft.
3.480" Stroke.
OEM type 5.700" connecting rods w/ 150,000 psi bolts.
Hypereutectic pistons.
Internal Front/ External Rear.

CYLINDER HEADS
BluePrint Aluminum Cylinder Heads - H8002K.
64cc chamber.
2.02" intake/1.60" exhaust valves.
195cc intake/75cc exhaust runners.

CAM SPECS
Cam Type: Flat Tappet
.480 Intake .486 Exhaust
229 Intake / 230 Exhaust duration
@ .050

IGNITION TIMING
34 Degrees Total at 3500 RPM.

ALSO INCLUDES
New valve covers
Oil pan
Timing cover
Brass freeze plugs
Dyno test results shipped with engine

Picture shown with optional tall, perimeter bolt valve covers. This engine requires a non weighted harmonic balancer, and a late 350 (for 1 piece rear seal) weighted flexplate/flywheel. If you are using an automatic transmission, BluePrint Engines recommends a 2000-2400 rpm stall converter. Recommended spark plugs are Champion 792 with .045"" gap. Not for use in pollution controlled vehicles. This engine is not compatible with factory fuel injection.

Compression Ratio: 10.0:1.
Aluminum Heads.
Flat Tappet Cam.
Cast Steel Crank.
Hypereutectic Pistons.

Webshop gemaakt met EasyWebshop