Looking for the perfect part? Can't find what you need? Contact us for expert advice!
Your expert in parts for cars beyond the ordinary.
American Legends Start Here – Classics, Trucks, Muscle & More!

Visit Webshop » Popular US Car models » Engines & Trans USA » Big Block Engines » GM Big Block ZZ572 Base Crate Engine 620hp

GM Big Block ZZ572 Base Crate Engine 620hp



GM 19331581 GM Big Block ZZ572 Base Crate Engine 620hp

The ZZ572 Base is the ultimate expression of Chevrolet Performance’s engineering capability.

=> 620 HP | 874,5 Nm

Proving the adage there’s no replacement for displacement, the ZZ572/620 is the ultimate expression of Chevrolet Performance’s engineering capability, wrapped up in a soul-stirring combination of performance and attitude. We build the ZZ572/620 with huge 4.560-inch bores and a 4.375-inch stroke to help it deliver 621 hp and a stunning 645 lb.-ft. of grunt!

Strength comes from a latest-generation tall-deck block casting with four-bolt main caps and an all-forged rotating assembly, while high-flow aluminum rectangular-port cylinder heads with massive 310cc intake passages, 118cc raised exhaust ports and 118cc combustion chambers process tremendous airflow. A hydraulic roller camshaft with incredible 0.632/0.632-inch lift and 254/264-degree duration specifications optimizes the airflow volume enabled by the large-port heads.
  • Engine Type: Chevy Tall-Deck Big-Block V-8
  • Displacement (cu in): 572
  • Bore x Stroke (in): 4.560 x 4.375
  • Block (P/N 19212195): Cast-iron with 4-bolt main caps
  • Crankshaft (P/N 88961554): Forged steel
  • Connecting Rods (P/N 88962926): Forged steel, shot peened
  • Pistons (P/N 88962925): Forged aluminum
  • Camshaft Type (P/N 19210721): Hydraulic roller
  • Camshaft Lift (in): .632 intake / .632 exhaust
  • Camshaft Duration (@.050 in): 254° intake / 264° exhaust
  • Cylinder Heads (P/N 19331429): Aluminum rectangular port, 118cc chambers
  • Valve Size (in): 2.250 intake / 1.88 exhaust; stainless steel
  • Compression Ratio: 9.6:1
  • Rocker Arms (P/N 19210726): Aluminum roller style
  • Rocker Arm Ratio: 1.7:1
  • Recommended Fuel: Premium pump
  • Ignition Timing: 36° Total at 4,000 rpm
  • Maximum Recommended rpm: 6,000
  • Balanced: Internal
INSTALLATION NOTES
• Clutch linkage boss is now drilled and tapped. When using cast-iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads, for clearance
• Requires addition of starter and fuel pump (not included)
• Gen VI tall-deck block has machined mechanical fuel pump boss
• Designed for pre-1976 street vehicles or any off-road vehicle
• Not intended for marine applications
• You do have a strong transmission and rear axle, don’t you?
Powered by EasyWebshop